Film Faced Shuttering Plywood
Our Film Faced Shuttering Plywood is compact and is made of toughened structural plywood. Film Faced Shuttering Plywood that we offer is highly durable as superior film faced densified shuttering Ply is used to make it. Strength factor of our Film Faced Shuttering Plywood make these withstand heavy load of concrete or the vibrations caused due to its pouring. This technique for manufacturing Film Faced Shuttering Plywood is known as 'Heating-cooling Cycle' process. Our Film Faced Shuttering Plywood is made from selected hardwood veneers, BWP grade of phenol formaldehyde resin that conforms to IS 848:1974. Film Faced Shuttering Plywood, provided by us, can be used for bonding permanent preservative treatment in a vacuum pressure impregnation plant. All this makes our Film Faced Shuttering Plywood resistant to termites and micro-organisms.
Highlights
- High wear and tear resistance : Warm less, Twist-free
- Resistance against attack from termite, fungus, rot, etc.
- Maintenance Tips Of Our Film Faced Shuttering Plywood
- Boards and stacks must be protected from rain and dampness. Film Faced Shuttering Plywood must be stored in packs on a Level Flat and raised surface in a clean, dry and covered place with free circulation of air Film Faced Shuttering Plywood must not be dragged over one another as this would scratch the surface. Extra care should be taken to avoid scratches. If the edges are dragged on faces or any extraneous matter like sand or small stone particles lie in between the surfaces. For better repetition, panels should be dried by stacking in free circulation of air and on suitable spacers after each use Cut edges of the plywood at the time of making concrete former should also be coated with suitable sealants like chlorinated rubber paint, for longer life of the Board.
